fuel consumption NISSAN ROGUE 2015 2.G Quick Reference Guide

20
SYSTEM GUIDE
VEHICLE INFORMATION DISPLAY
The vehicle information display 1 displays such items as:

Vehicle settings

Trip computer information

Drive system warnings and settings
(if so equipped)

Audio information

Navigation turn-by-turn

Cruise control system information

NISSAN Intelligent Key® operation information

Indicators and warnings

Tire pressure information
USING THE VEHICLE INFORMATION DISPLAY
The vehicle information display can be changed using
the
button 2 and the ENTER buttons 3
located on the steering wheel.

Press the button2 to change the
display mode.

Move the switch 3 up or down to navigate
through the vehicle information display menu.

Press the ENTER button 4 to change
or select an item.

Press 5 to go back to the previous menu.
START-UP DISPLAY
When the ignition is in the ON position, the vehicle information display will support four of
the following modes:

Active system status (if so equipped) Fuel economy

Trip computer Warnings (if there are any)

Tire pressure information
RESETTING THE TRIP COMPUTER
1. Press the
button 2 until you reach the trip computer mode.
2. Press the
button 2 for more than 1.5 seconds to reset fuel consumption, average
speed, distance to empty and journey time.
3. Pushing the TRIP RESET switch
6 for more than 1 second resets the currently
displayed trip odometer to zero.
SETTINGS
The setting mode allows you to change the information displayed in the vehicle
information display:

Driver Assistance Tire Pressures Meter Settings

Unit Vehicle Settings Language

Maintenance Factory Reset Alerts
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
5
3
2
4
6
1
1904704_15d_Rogue_QRG_031915.indd 203/19/15 1:23 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.